Polycom Version 1.4.x 17 manual Stop DST on the last Sunday in October at 2 am

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

• stop DST on the last Sunday in October at 2 am.

	Permitted
Attribute	Values	Default	Interpretation
tcpIpApp.sntp.resyncPeriod	positive	86400	Time in seconds
	integer	(24	between SNTP re-
		hours)	syncs.
tcpIpApp.sntp.addressa	valid host	clock	Address of the SNTP
	name or IP		server.
	address
tcpIpApp.sntp.gmtOffset	positive or	-28800	Offset in seconds of the
	negative	(Pacific	local time zone from
	integer	time)	GMT.
			Note: 3600 seconds per
			hour
tcpIpApp.sntp.daylightSavings.enable	0, 1	1	If set to 1, apply day-
			light savings rules to
			displayed time.
tcpIpApp.sntp.daylightSavings.fixedDay-	0, 1	0	If set to 1, “April 1st” is
Enable			used, otherwise “the
			first Sunday in April” is
			used.
tcpIpApp.sntp.daylightSavings.start.month	1-12	4 (April)	Month to start DST.
			1=Jan, 2=Feb, ...,
			12=Dec
tcpIpApp.sntp.daylightSavings.start.date	1-31	1	Day of the month to
			start DST.
tcpIpApp.sntp.daylightSavings.start.time	0-23	2	Time of day to start
			DST, in 24 hour clock.
			2=2 am, 14=2 pm
tcpIpApp.sntp.daylightSavings.start.dayOf-	1-7	1	Day of week to apply
Week			DST. 1=Sun, 2=Mon,
			..., 7=Sat
tcpIpApp.sntp.daylightSavings.start.dayOf-	0, 10	0	If set to 1 and fixedDay-
Week.lastInMonth			Enable=0, start DST on
			the last day of the week
			(specified by dayOf-
			Week) in the month,
			rather than the first in
			the month.
tcpIpApp.sntp.daylightSavings.stop.month	1-12	10	Month to stop DST.
			1=Jan, 2=Feb, ...,
			12=Dec

Copyright © 2004 Polycom, Inc 89