Polycom Version 1.4.x 17 manual Following sampled audio Wave file .wav formats are supported

Models: Version 1.4.x 17

1 147
Download 147 pages 13.75 Kb
Page 80
Image 80

Administrator Guide - SoundPoint® IP / SoundStation® IP

Optimization

In the following table, x is the chord-set number and cat is one of callProg, ringer, or misc.

 

Permitted

 

Attribute

Values

Interpretation

 

 

 

tone.chord.cat.x.freq.y

0-1600

Frequency for this component in Hertz; up to four

 

 

chord-set components can be specified (y=1, 2, 3,

 

 

4).

 

 

 

tone.chord.cat.x.level.y

-57 to 3

Level of this component in dBm0.

 

 

 

tone.chord.cat.x.onDur

positive

On duration in milliseconds, 0=infinite.

 

integer

 

 

 

 

tone.chord.cat.x.offDur

positive

Off duration in milliseconds, 0=infinite.

 

integer

 

 

 

 

tone.chord.cat.x.repeat

positive

Specifies how many times the ON/OFF cadence

 

integer

is repeated, 0=infinite.

 

 

 

4.6.1.4 Sampled Audio for Sound Effects <sampled_audio/>

The following sampled audio WAVE file (.wav) formats are supported:

mono 8 kHz G.711 ∝-Law

G.711 A-Law

L16/1600 (16-bit, 16 kHz sampling rate, mono)

The phone uses built-in wave files for some sound effects. The built-in wave files can be replaced with files downloaded from the boot server or from the Internet, however, these are stored in volatile memory so the files will need to remain accessible should the phone need to be rebooted. Files will be truncated to a maximum size of 300 kilo- bytes.

In the following table, x is the sampled audio file number.

Attribute

Permitted Values

Interpretation

 

 

 

saf.x

Null OR valid path

If Null, the phone will use a built-in file;

 

name OR an RFC

If set to a path name, the phone will attempt to download

 

1738-compliant URL

 

this file at boot time from the boot server;

 

to a HTTP, FTP, or

 

If set to a URL, the phone will attempt to download this

 

TFTP wave file

 

resource.

file at boot time from the Internet.

 

Note: Refer to the

Note: A TFTP URL is expected to be in the format:

 

above wave file for-

tftp://<host>/[pathname]<filename>, for example: tftp://

 

mat restrictions.

somehost.example.com/sounds/example.wav

 

 

 

72

Copyright © 2004 Polycom, Inc.

Page 80
Image 80
Polycom Version 1.4.x 17 manual Following sampled audio Wave file .wav formats are supported