Polycom Version 1.4.x 17 manual Call Handling Configuration call

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.1.10 Call Handling Configuration <call/>

	Permitted
Attribute	Values	Default	Interpretation
call.rejectBusyOnDnd	0, 1	1	If set to 1, reject all incoming calls with
			the reason “busy” if do-not-disturb is
			enabled.
call.enableOnNotRegistered	0, 1	1	If set to 1, calls will be allowed when the
			phone is not successfully registered, other-
			wise, calls will not be permitted without a
			valid registration.
call.offeringTimeOut	positive	60	Time in seconds to allow an incoming call
	integer		to ring before dropping the call, 0=infi-
			nitea.
call.ringBackTimeOut	positive	60	Time in seconds to allow an outgoing call
	integer		to remain in the ringback state before
			dropping the call, 0=infinite.
call.lastCallReturnString	string of	*69	The string sent to the server when the user
	maximum		selects the “last call return” action.
	length 32
call.callWaiting.prompt	0, 1	0	If set to 1, an incoming call received when
			another call is active will change the User
			Interface focus (call appearance and soft
			keys).
call.shared.disableDivert	0, 1	1	If set to 1, disable diversion feature for
			shared lines.
call.shared.seizeFailReorder	0, 1	1	If set to 1, play re-order tone locally on
			shared line seize failure.
call.shared.one-	0, 1	0	If set to 1, when a shared line has a call on
TouchResume			hold the remote user can press that line
			and resume the call. If more than one call
			is on hold on the line then the first one will
			be selected and resumed automatically.
			If set to 0, pressing the shared line will
			bring up a list of the calls on that line and
			the user can select which call the next
			action should be applied to.

a.The call diversion, no answer feature will take precedence over this feature if enabled. For more information, see 4.6.3.3.3 No Answer <noanswer/> on page 125.

92 Copyright © 2004 Polycom, Inc.