Converged Enhanced Ethernet Command Reference 165
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
Chapter
10
Internet Group Management Protocol Commands

clear ip igmp group

Clears information related to learned groups in the IGMP protocol module.
Synopsis clear ip igmp group [A.B.C.D [interface tengigabitethernet slot/port | interface port-channel
number | interface vlan vlan_id] | interface tengig abitethernet slot/port | interface port-channel
number | interface vlan vlan_id]
Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
interface Use this keyword to specify any of the following interfaces:
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
interface Use this keyword to specify any of the following interfaces:
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
interface Use this keyword to specify any of the following interfaces:
vlan vlan_id Specifies which VLAN interface to display the snooping configuration related
information. The range of valid values is 1-3583.
Defaults There are no defaults for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to clear the group information in the IGMP database, including entries for either
a specific group on all interfaces or specific groups on specific interfaces.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To clear information for all groups in the IGMP protocol:
switch#clear ip igmp group
See Also none