Converged Enhanced Ethernet Command Reference 107
53-1001762-01
show mac-address-table 7
DRAFT: BROCADE CONFIDENTIAL
show mac-address-table
Displays a specific MAC address table static and dynamic entry or the MAC address table static and
dynamic entries for a specific interface or VLAN.
Synopsis show mac-address-table [address mac-addr | aging-time | count | dynamic | interface
{tengigabitethernet slot/port | port-channel number} | linecard interface tengigabitethernet
slot/port | static | vlan vlan_id ]
Operands address mac-address
Specifies a 48-bit MAC address. The valid format is H.H.H (available in EXEC
mode only).
aging-time Displays the aging time.
count Displays the count of forwarding entries.
dynamic Displays the dynamic MAC addresses.
interface Displays the forwarding information of an interface.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the port-channel number. The range of valid values is 1–63.
linecard Displays the linecard information.
interface Displays the forwarding information of an interface.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
static Displays the static MAC addresses.
vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583.
Defaults No static addresses are configured.
Command
Modes
EXEC mode
Description Use this command to display a specific static or dynamic MAC address entry or all entries for a
specific interface, a specific VLAN, a specific linecard, or for all interfaces and all VLANs.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display a specific MAC address in the table:
switch#show mac-address-table address 0011.2222.3333