Converged Enhanced Ethernet Command Reference 77
53-1001762-01
hello 5
DRAFT: BROCADE CONFIDENTIAL
hello
Sets the Hello transmit interval.
Synopsis hello seconds
no hello
Operands seconds Sets the Hello transmit interval. The range of valid values is 4-180 seconds.
Defaults The default is 30 seconds.
Command
Modes
Protocol LLDP configuration mode
Description Use this command to set the interval between LLDP hello messages. Use the no hello command to
return to the default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To set the time interval to 10 seconds between the transmissions:
switch#configure terminal
switch (config) #protocol lldp
switch(conf-lldp)#hello 10
See Also none