224 Converged Enhanced Ethernet Command Reference
53-1001762-01
dot1x timeout re-authperiod
13
DRAFT: BROCADE CONFIDENTIAL
dot1x timeout re-authperiod
Sets the number of seconds between reauthorization attempts.
Synopsis dot1x timeout re-authperiod seconds
Operands seconds Specifies the seconds between reauthorization attempts. The range of valid
values is 1-4294967295.
Defaults The default time is 3600 seconds.
Command
Modes
Interface configuration mode
Description Use this command to set the number of seconds between reauthorization attempts.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To set 25 seconds as the amount of time between reauthorization attempts:
switch(config)#interface tengigabitethernet 0/1
switch(conf-if-te-0/1)#dot1x timeout re-authperiod 25
See Also none