Brocade Communications Systems 53-1001762-01 line vty

Converged Enhanced Ethernet Command Reference 19

53-1001762-01

line vty 2

DRAFT: BROCADE CONFIDENTIAL

line vty

Configures the virtual terminal line setting to allow you to set the wait time interval for the Telnet

session to time out.

Synopsis line vty first number last number

Operands first number Specifies the first line number. The range of valid values is 0-31.

last number Specifies the last line number. The range of valid values is 0-31.

Defaults There are no default configurations for this command.

Command

Modes

Global configuration mode

Description Use this command to configure the virtual terminal line settings to set the exec-timeout.

Usage

Guidelines

There are no usage guidelines for this command.

Examples To configure the wait interval for the telnet session to time out after 2 minutes, 30 seconds if there

is no response from the user:

switch#configure terminal

switch(config)#line vty 23 31

switch(conf-line)#exec-timeout 2 30