Converged Enhanced Ethernet Command Reference 225
53-1001762-01
dot1x timeout server-timeout 13
DRAFT: BROCADE CONFIDENTIAL
dot1x timeout server-timeout
Sets the authentication sever response timeout.
Synopsis dot1x timeout server-timeout seconds
Operands seconds Specifies the number of seconds that a switch waits for the transmission of
packets by the switch to the authentication server. The range of valid values
is 1-65535.
Defaults The default timeout is 30 seconds.
Command
Modes
Interface configuration mode
Description Use this command to set the authentication sever response timeout.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To set 40 seconds as the switch-to-authentication server transmission time:
switch(config)#interface tengigabitethernet 0/1
switch(config-if)#dot1x timeout server-timeout 40
See Also none