CLI Commands B-9

add snmp trap_community <name>

Adds to the list of SNMP authorized users. The community name and IP address of SNMP requests from managers on the network must match the list, which you can see using list snmp communities.

Parameter

Description

 

 

<community_name>

Group name that authorizes SNMP requests.

 

 

address

IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn

 

 

access

Determines what type of access to SNMP MIBs the added user will have.

 

Options: Read Only (RO) and Read Write (RW).

 

 

address [ip_address]

Adds￿to the list of community name/IP address pairs that are allowed to receive SNMP traps. You can see the list of authorized users with the list snmp communities command.

Parameter

Description

 

 

<name>

Group name defining who can receive SNMP traps.

 

 

address

IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn

 

 

add syslog Adds an IP host to the list of IP hosts that will receive syslog entries. You can see <ip_name_or_addr> the current log levels for the system using list facilities, and modify the current log

loglevel [loglevel] level for each facility using set facility loglevel.

Parameter

Description

 

 

<ip_name_or_address>

Host name or IP address of the Unix host that will receive syslog

 

information.

 

 

loglevel

There are five levels of logging:

 

CRITICAL - a serious system error, which may effect system integrity

 

UNUSUAL - an abnormal event, which the system should be able to

 

recover from

 

COMMON - a regularly occurring event that is not frequent

 

VERBOSE - a regular periodic event, e.g. a routing update message

 

DEBUG - for debugging only

 

 

add tftp client Adds the tftp client to the authorization table for tftp access.

<ip_name_or_addr>

 

Parameter

Description

 

 

 

 

 

<ip_ name_or_addr>

Host name or IP address of a host to be added. An address of 0.0.0.0

 

 

allows all clients TFTP access.

add tunnel

 

 

server_end_point [host name or ip_address]

<tunnel_ name>

￿

 

 

 

Sets up a VPN tunnel with the default values.

 

 

 

 

Parameter

Description

 

 

 

 

 

 

<tunnel name>

The name specified for the tunnel you are adding.

 

 

 

 

 

server_end_point

The host name or IP address of the VPN server at which this tunnel

 

 

terminates.

 

 

 

 

Page 111
Image 111
3Com OfficeConnect Remote 812 Add snmp trapcommunity name, Ipnameoraddr, Add tunnel Serverendpoint host name or ipaddress