3Com OfficeConnect Remote 812 manual settings

CLI Commands B-43

show dhcp relay Displays the current configuration and counters for both the primary and secondary DHCP relay server.

IP Address - IP address of the DHCP Server.

Max Hops - maximum hops to get to this server.

Status - enabled or disabled.

Request Sent to Server - number of requests sent to server.

Responses Received from Server - number of responses received from

￿the server.

Responses Received with Error - number of responses received that were in error.

show dhcp server Displays various counters for the DHCP Server. counters

Lease Requests Received

Lease Accepts Received

Lease Renewals Received

Lease Refusals Received

Lease Releases Received

Unrecognized Packets Received

Lease Offers Transmitted

Lease Confirmations Transmitted

Renewal Refusals Transmitted

Lease Confirmations Transmitted

Requested Address Out of Range

Requested Address In Use

￿No Free Addresses

show dhcp server Displays the current settings for the DHCP Server.

settings

Status - Whether DHCP Server is active.

Start IP Address - First IP address in the pool of IP addresses that will be handed out through DHCP.

End IP Address - Last IP address in the pool of IP addresses that will be handed out through DHCP.

IP Mask - IP network mask that applies to the pool of IP addresses being administered.

IP Router - IP address that the workstations should use as their default gateway.

Lease - The number of seconds that an IP address will be allocated to a workstation without having to be renewed.

Host Name - DNS host name of this unit.

￿Domain Name - Name of the DNS domain we exist in.