3Com OfficeConnect Remote 812 manual set system, name “name”, location “location”, tunnelname

B-34APPENDIX B: CLI COMMAND DESCRIPTION

set system	name [“name”]
	location [“location”]
	contact [“contact info”]

￿transmit_authentication_name [name]

Specifies system contact information, which is displayed using show system. The user name is the remote account name. Location, name and contact names are limited to 64 characters.

Parameter	Description
name	A name identifying the user to the system.
location	The location of the user.
contact	The information contact for the user.
transmit_	Deprecated
authentication_name

set syslog <ip_address> Sets the error reporting level for syslog entries that will be sent to the specified IP loglevel [level] address. You must have previously defined this syslog IP address using add syslog.

There are five levels of logging:

CRITICAL - a serious system error, which may effect system integrity

UNUSUAL - an abnormal event, which the system should recover from

COMMON - a regularly occurring event that is not frequent

VERBOSE - a regular periodic event, e.g. a routing update message

￿DEBUG - for debugging only

set time <time> Sets the system time, and leaves the date unchanged. Use show date to see what the current settings are. The format is: hh:mm:ss. The seconds field is optional.

set tunnel Modifies tunnel parameters.

<tunnel_name>

The following is a list of set tunnel parameters and supported values:

Table 6-7812 Set Tunnel Parameters and Supported Values

Parameter	Supported Value	Remarks
ENCRYPTION_ALGORYTHM	NONE
MTU	1400
TUNNEL_TYPE	PPTP, L2TP	PPTP is the default.
INPUT_FILTER	<filter_name>
OUTPUT_FILTER	<filter_name>
PASSWORD	<password>