3Com OfficeConnect Remote 812 manual Poolmembers number, Sets parameters for dynamic IPX networks

	CLI Commands B-31
packet_maximum_size	Maximum size packet that this IPX network will support.
rip	Sets the RIP mode.
rip_age_multiplier	Number to multiply the rip_update_interval by, to obtain the value
	for the aging out the entries in the RIP database.
rip_packet_size	Size of RIP packets.
rip_update_interval	How often RIP should send periodic updates.
sap	Sets the SAP mode.
sap_age_multiplier	Number to multiply the sap_update_interval by, to obtain the value
	for aging out entries in the SAP database.
sap_packet_size	Size of SAP packets.
sap_nearest_replies	Whether or not SAP will look its nearest neighbors.
sap_update_interval	How often RIP should send periodic updates.

set ipx system priority [priority level] default_gateway [ipx_host_add] initial_pool_address [ipx_addr]

￿pool_members [number]

Sets parameters for dynamic IPX networks.

Parameter	Description
priority	Priority for the dynamic IPX network.
default_gateway	Default router for the dynamic IPX network.
initial_pool_address	Initial IPX address used to dynamically assign IPX network.
pool_members	Number of addresses to reserve in the pool of IPX addresses used when
	dynamically assigning IPX networks.

set network service <admin_name>

server_type [server_type] socket [socket_number] data [“string”]

￿close_active_connections [TRUE FALSE]

Sets parameters for configured network services.

You can list the configured network services using list network services. The service must be disabled for this command to work.

Parameter	Description
<admin_name>	Designation you assigned to network service with the add
	network service command. Limit of 32 characters.