3Com OfficeConnect Remote 812 manual Paused Commands, More or CR, Continue printing, Quit

B-22APPENDIX B: CLI COMMAND DESCRIPTION

list tcp connections Displays information about all TCP connections. Connection status is defined in RFC-793.

Local Address - IP address of the local host for this connection

Local Port - TCP port number used by the local connection

Remote Address - IP address of the remote host for this connection

Remote Port - TCP port number used by the remote connection

￿Status - status of the connection. E.g.: Listen

list tftp clients Displays IP addresses of all users who allowed to use the Trivial File Transfer Protocol (TFTP) to connect to the system. You must have used add network service to add TFTP support to the system and used add tftp client to authorize users to connect.

list udp listeners Displays User Datagram Protocol (UDP) ports being used by the system. These ports correspond to processes which are receiving UDP data (for example SNMP, User Management, TFTP service). Local IP addresses and port numbers are listed for each UDP port.

list tunnel Lists (displays) the name and status of tunnels.

list users Lists all users, showing:

User Name - user designation you specified using add user

Login Service - The service used to login to the network (i.e. TELNET).

￿Status - link status: ACTIVE, INACTIVE or DISABLED

list vc Lists all virtual channel profiles, showing:

Name - user designation you specified using add vc

Network Service - type of network service: RFC1483, PPP, PPPLLC

VPI - Virtual Path Identifier

VCI - Virtual Channel Identifier

￿Status - link status: ACTIVE, INACTIVE or DISABLED

login_required Enables or disables CLI password protection.

password The CLI password. It must consist of 1 to 8 alphanumeric (printable) characters, inclusive.

PAUSED COMMANDS

More (or CR)	Continue printing
Quit	Cancel rest of output