3Com OfficeConnect Remote 812 manual negotiate, addressselection

set ip network <network name> routing_protocol [NONE RIPV1 RIPV2]

To set enable/disable RIP or set the version to use for a particular LAN IP network, use the command:

delete ip network <network name>

You can delete a disabled network using the command:

disable ip network <network name>

By default, the network is enabled when it is created. You can disable the network using the following command:

6-16CHAPTER 6: MANUAL SETUP

You can obtain a list of all configured networks using the command list networks. To only list IP networks, use list ip networks.

￿￿The reconfigure ip network command can be used to modify an existing IP network’s address or frame type.

Configuring IP RIP on IP RIP is configurable on each LAN IP network. The OCR 812 supports two versions the LAN of RIP, V1 or V2. You can also disable RIP completely.

￿Other permutations of the set ip network command can be used to configure advanced RIP features and policies.

Configuring IP for the In order to enable IP to be routed to a remote site, you must configure the Remote Site Connection following items in the VC profile associated with the remote site connection.

You must enable IP routing in the profile

You must enter the remote IP address information

You must enter the local IP address information

￿To enable or disable IP routing in a VC profile, use the command:

set vc <vc name>

ip [DISABLE ENABLE]

The remote IP address information consists of the IP address of the router at the other end of the VC connection. This address can be either specified by you, or (if you are using PPP as the Network Service for the connection) it can be learned when the PPP session is established.

	To specify the remote IP address, use the command:
	set vc <vc name>
	remote_ip_address	<ip address/mask>
￿	To specify that the	remote IP address should be learned you can enter
	255.255.255.255/H for the <ip address/mask> parameter, or you can use the
￿
	command:
	set vc <vc name>
	address_selection	negotiate