3Com OfficeConnect Remote 812 manual Sets ATM parameters for VCs

CLI Commands B-39

Sets ATM parameters for VCs.

Parameter	Description
<vc_name>	VC profile name.
Bt	Burst Tolerance (VBR only).
Category_of_service	Select either Unspecified (UBR) or Variable (VBR).
Pcr	Peak Cell Rate (both UBR and VBR).
Scr	Sustained Cell Rate (VBR only).
Type	This designated a virtual circuit as either a Switched Virtual Circuit (SVC)
	or a Permanent Virtual Circuit (PVC).
Vci	Virtual Channel Identifier.
Vpi	Virtual Path Identifier.

SHOW Show commands display details about system entities.

show access Displays the current status of the access list feature.

Administration Status - Indicates status of the access list feature. Options are Enabled or Disabled.

LAN Access - Indicates whether all frames received on the LAN interface

￿are subject to access list checking.

Number of Frames Blocked - Number of frames silently discarded because the Remote Host’s subnet was not on the access list.

show atm status Displays current statistics for the ATM protocol running over the ADSL WAN interface. It lists:

Cell Delineation - Whether or not cell delineation is currently achieved.

ILMI VPI - ILMI Path Identifier used for obtaining dynamic VC’s (Not supported in OfficeConnect Remote 812 1.0).

ILMI VCI - ILMI Channel Identifier used for obtaining dynamic VC’s (Not supported in OfficeConnect Remote 812 1.0).

TX Cells - Number of ATM data cells sent over the WAN.

TX Idle Cells - Number of ATM idle cells sent over the WAN.

RX Good Cells - Number of well-formed and correctly addressed ATM data cells received from the WAN.

RX Idle Cells - Number of well-formed and correctly addressed ATM idle

￿cells received from the WAN.

RX No Pkt Avail - Number of times a packet was reassembled but could not be delivered over the LAN because of lack of packet memory within the OCR 812.

RX Bad VPI or VCI - Number of ATM cells received with a bad or inactive VPI and/or VCI number.

RX Bad HEC - Number of ATM cells received with a bad ATM header.

￿RX Queue Full - Number of times a packet was dropped because the RX queue was full.