3Com OfficeConnect Remote 812 manual Configuring IPX Static and Framed Services, Manual Setup

The Service table contains IPX server names, the services they provide, their network addresses and node addresses, and their relative distances. Examples of services include file servers and printers.

Note the following:

6-34CHAPTER 6: MANUAL SETUP

Configuring IPX Static

and Framed Services

A static service entry is a manually configured service accessible from the LAN.

Once created, a static service entry remains in the Service table until deleted.

Static services differ from dynamic services in that dynamic services are learned ￿real-time via SAP packet exchange between routers.

A framed service entry is a manually configured service accessible from the WAN. A framed service is active only when the connection to the associated remote site is active.

Use static and framed services for servers not learned using SAP.

To add a static IPX service over the LAN, use the command: add ipx service <service name>

￿The service will appear in the IPX Services table. For example:

gateway <network.node address> ipx_net <server network address> metric <number>

node <server node address> socket <hex number> type <hex number>

add ipx service Serv411 gateway 98.0:0:0:0:0:0 ipx_net 31ab17c9 metric 1 node 0:0:0:0:0:1 socket 451 type 4

You can display all IPX Services with the list ipx services command.

To delete an static IPX service, use the command:

￿delete ipx service <name> type <hex number>

To add a framed service that will be installed in the IPX Services table when a connection is established, use the command:

add ipx_service vc <vc name> hops <number>

ipx_net <server network address> name <service name>

node <server node address> socket <hex number> type <hex number>

The route will be removed from the IPX routing table when the VC profile is disabled.

To delete a Framed route so that it no longer will be installed in the routing

￿table when the connection is established use the command: