3Com OfficeConnect Remote 812 Ping, Rename, Resolve, rename file inputfile outputfile, More or CR

CLI Commands B-23

PING

More (or CR) Continue printing

ping <ip_name_or_addr>

output [output_filename] count [count]

interval [interval]

￿timeout [timeout_value]

Sends an ICMP echo request to a remote IP host. A reply from the pinged address indicates success.

Parameter	Description
<ip_name_or_address>	IP address in dotted notation, or host name of remote system.
output	A file name to direct output to.
count	Number of ICMP echo requests to send.
interval	Number of seconds to wait between sending each request.
timeout	Number of seconds to wait for an echo response to return.

QUICKVC Runs the QuickVC Setup program to easily configure a virtual channel connection (remote site profile). See Chapter 5 for a complete description of the QuickVC Setup program.

REBOOT Reboot the system. If you have made any configuration changes, be sure to save all before rebooting. Also see the delete configuration command.

RENAME

rename file <input_file> <output_file>

Renames files within the FLASH file system.

The FLASH file system is a flat file system (no subdirectories). Use the list files command to see what files currently exist.

Parameter	Description
<input_file>	Name of the original file.
<output_file>	New name for the file

RESOLVE

resolve name Returns an IP Address for the specified host name by sending it to DNS for <ip_host_name> resolution. If the Domain Name has been specified using the set DNS command, it

will also be resolved, otherwise you must specify it as part of the name. This command requires either a DNS local host entry (use add DNS host) or a DNS server (use add DNS server) to resolve the host name. It is the reverse of the ARP command.