3Com OfficeConnect Remote 812 set dhcp relay server1, set dhcp relay server2, address IPaddress

CLI Commands B-25

prompt <string>	Sets the global command prompt for the CLI. Use show command
	to see the currently defined prompt. Limit: 64 characters.
local_prompt <string>	Sets a separate prompt for a command file process. Limit: 64
	characters.

set date <date> Sets the system date, and leaves the time unchanged. Use show date to see what the current settings are. The format is: dd-mmm-yyyy. The month should be the first three characters of the month name. The year can be either 2 or 4 digits (97 or 1997).

set dhcp mode <mode> Sets the DHCP mode for the unit.

	Parameter		Description
	mode		DHCP functionality you wish to enable for this unit. Currently available
			services are:
			DISABLED - disables all DHCP services.
			RELAY - enables the DHCP Relay service.
			SERVER - enables the DHCP Server within the unit.
set dhcp relay server1		address <IP_address>
		enabled [YES NO]
	￿	max_hops <number>

Defines the address and characteristics of the primary DHCP Server over the WAN that should receive our relayed DHCP requests.

	Parameter	Description
	address	IP address of the primary DHCP server over the WAN port where DHCP
		resolution requests should be forwarded.
	enabled	Whether or not this server is active for relay.
	max_hops	maximum number of hops the redirected requests are allowed to accrue
		without the request being dropped.
set dhcp relay server2
	address <IP_address>
	enabled [YES NO]

￿max_hops <number>

Defines the address and characteristics of the secondary DHCP Server over the

WAN that should receive our relayed DHCP requests.

Parameter	Description
address	IP address of the secondary DHCP server over the WAN port where DHCP
	resolution requests should be forwarded.
enabled	Whether or not this server is active for relay.
max_hops	maximum number of hops the redirected requests are allowed to accrue
	without the request being dropped.