3Com OfficeConnect Remote 812 manual vcname counters, vcname settings, COUNTERS for PPP BUNDLE

CLI Commands B-51

show ppp on vc This shows counters for the Point-to-Point Protocol on the Virtual Circuit.

<vc_name> counters

show ppp on vc This shows the settings for the Point-to-Point Protocol on the Virtual Circuit.

<vc_name> settings

show ppp on interface Displays statistics for PPP running on the specified interface.

<name> counters

COUNTERS for PPP BUNDLE 1

Operational Status - not opened or opened

Number Active Links - sum of active links using this PPP bundle

Transmit Packets - sum of packets transmitted over this bundle

￿Bytes from Upper Layer - sum of bytes received from an upper layer application for transmission over this bundle. This counter represents all data handed down to the PPP application BEFORE compression occurs.

Bytes to Lower Layer - sum of bytes sent to a lower layer application for

￿transmission over this bundle. This counter represents all data to be handed down to the lower layer application AFTER compression occurs.

Received Packets - sum of packets received from a lower layer application over this bundle

Bytes to Upper Layer - sum of bytes to be handed up to an upper layer application over this bundle

Bytes from Lower Layer - sum of bytes received from a lower layer

￿application over this bundle

Total Bad Headers - sum of packets with incorrect PPP Header (Address, Control, PID Field)

COUNTERS for PPP LINK 1 - 5

Operational Status - not opened or opened

Received Packets - too long

Transmit Frames - sum of frames received from the PPP application for transmission over this link

Bytes from Upper Layer - sum of bytes handed down from an upper layer application for this link

Bytes to Lower Layer - sum of bytes received from a lower layer application for this link

Received Frames - sum of frames received on this link

Bytes to Upper Layer - sum of bytes handed up to an upper layer

￿application over this link

Bytes from Lower Layer -sum of bytes received from a lower layer application over this link

show ppp on interface Displays the settings for PPP on the specified WAN interface.

<name> settings