3Com OfficeConnect Remote 812 manual Sample Identification, Information, Sample Output Display

CLI QuickVC Setup Script 5-5

Sample Identification	This section contains a sample of possible settings.
Information
	Encapsulation type:	PPP
	ATM information:
	VPI/VCI:	0/33
	Category of Service:	UBR
	Peak Cell Rate:	0
	IP:	Enabled
	Local WAN IP Address:	Learned
	Remote WAN IP Address:	Learned
	WAN Interface Type:	Numbered
	Address Translation (PAT):	Enabled
	RIP:	no
	Remote is Default Gateway:	yes
	IPX:	Enabled
	IPX WAN Network Number:	Learned
	IPX WAN RIP:	Yes
	Bridging:	Enabled
	Question		Default	Your System
	Do you want to change any answers?		[no]
	Do you want to actually execute these commands?		[yes]
Sample Output Display
	OCR-DSL> add vc “name”
as Quick Setup Executes	OCR-DSL>set vc “name” ip disable ipx disable bridging disable
	OCR-DSL>set vc “name” network_service ppp

OCR-DSL>set vc “name” atm vpi 0 vci 0 category_of_service unspecified pcr 0 OCR-DSL>set vc “name” ip enable

OCR-DSL>set vc “name” remote_ip_address 0.0.0.0/C OCR-DSL>set vc “name” local_ip_address 0.0.0.0 OCR-DSL>set vc “name” ip_routing listen rip ripv2 OCR-DSL>set vc “name” nat_option enable OCR-DSL>set vc "name" ipx enable

OCR-DSL>set vc "name" ipx_enable ipx_address 00000000 ipx_routing all OCR-DSL>set vc “name” bridging enable

OCR-DSL> OCR-DSL>enable vc “name” OCR-DSL>_save users _SAVE USERS Complete

OCR-DSL>Spawned Process CFP 272016 /./QuickSetup.commands Completed Successfully

OCR-DSL>