3Com OfficeConnect Remote 812 show system, set system name name location location contact contact

System Administration 6-43

Displaying Date, Time, To display current date, current time, and system uptime (time elapsed since and System Uptime power-on), use the command show date.

Date and time information displays in the following format:

System Date:	02-MAR-1998 05:17:00
System UpTime:	2d 08:37:54

Setting System The system name, location and contact information is useful when monitoring the Identification OCR 812 remotely. You should choose a name, location and contact that is

appropriate for the unit.

You can view the settings using the command:

show system.

To set these parameters use the command:

￿set system name <name> location <location> contact <contact>

The name, location, and contact can be up to 32 characters long. For example, set system name OCR1 location Rack4 contact SysAdmin@555-1212

You must assign a system name to the OCR 812 using the SET SYSTEM NAME <name> command. If you do not assign a system name, the unit may reboot during PPP operation.

Configuring Web Setting up a login user allows you to provide controlled access to the OCR 812 Browser and TELNET from a Web browser or through TELNET. Connecting with a Web browser allows

Login Access you to configure and monitor your unit using the OCR 812 Manager. Connecting using TELNET on a workstation allows you to remotely manage the unit using CLI.

A default user name of root and password !root are provided by DHCP Smart Mode and the IP Wizard during the initial installation. For secure access, you should add a private login name and password and delete the default name.

To view the current login users, use the command:

￿list users

To add a login user, use the command: add user <name> password <password>

The name can be up to 32 characters long and the password can be up to 15 characters long.

To delete a login user, use the command:

delete user <name>

To change the password, use the command:

￿set user <name> password <new password>

To enable the use of CLI for TELNET users, issue the additional command: enable security_option remote_user administration