3Com OfficeConnect Remote 812 manual Authentication and Encryption, Values

Setting Up a Virtual Private Network (VPN) Tunnel 6-9

Table 6-2812 Set Tunnel Parameters and Supported Values

Parameter	Supported Value	Remarks
INPUT_FILTER	<filter_name>
OUTPUT_FILTER	<filter_name>
PASSWORD	<password>
SEND_PASSWORD	<password>	The SEND_PASSWORD
		must match the
		authentication password
		on the VPN server. You
		must change the default
		SEND_PASSWORD using
		the SET TUNNEL
		command.
MTU	1400
SEND_NAME	<name>	The SEND_NAME must
		correspond with the
		authentication name on
		the VPN server.
NAT_OPTION	PAT
LOCAL_IP_ADDRESS	<ip_address>	255.255.255.255 is the
		recommended setting for
		LOCAL_IP_ADDRESS
REMOTE_IP_ADDRESS	<ip_address>	255.255.255.255 is the
		recommended setting for
		REMOTE_IP_ADDRESS

For example, to change the SEND_PASSWORD settings of a tunnel named ZOOM to VPN, enter the following command:

SET TUNNEL ZOOM SEND_PASSWORD VPN

You must disable the tunnel using the disable tunnel <tunnel_name> command before you can change any parameters.

Creating a VPN Tunnel To change any of the default values for a VPN tunnel created using the Using Non-Default add tunnel command, enter the set tunnel command.

Values

Encrypting a PPTP or Encryption protocols can be used in conjunction with authentication protocols to L2TP Tunnel ensure that the VPN, private networks, and private data cannot be accessed or

intercepted by unauthorized parties. To set up encryption for any VPN tunnel, you can use either the OCR 812 web configurator or the OCR 812 CLI.

To learn how to set up encryption using the CLI, see Configuring

￿Authentication and Encryption.

To learn how to set up encryption using the OCR 812 web configurator, see the Online User’s Guide, the section called “Configuring Virtual Private Networks”.