3Com OfficeConnect Remote 812 set user username, message “message”, password password, Parameter

				CLI Commands B-35
Table 6-7812 Set Tunnel Parameters and Supported Values
		Parameter	Supported Value	Remarks
		SEND_PASSWORD	<password>	The SEND_PASSWORD
				must match the
				authentication password
				on the VPN server. You
				must change the default
				SEND_PASSWORD using
				the SET TUNNEL
				command.
		ENCRYPTION_ALGORITHM	NONE
			AUTO
			MICROSOFT_128BIT
			MICROSOFT_40BIT
			MICROSOFT_56BIT
			REQUIRED
		MTU	1400
		SEND_NAME	<name>	The SEND_NAME must
				correspond with the
				authentication name on
				the VPN server. If you do
				not specify <name>, the
				system sets the value for
				this field to <tunnel
				name>.
		NAT_OPTION	PAT
		LOCAL_IP_ADDRESS	<ip_address>	255.255.255.255 is the
				recommended setting for
				LOCAL_IP_ADDRESS
		REMOTE_IP_ADDRESS	<ip_address>	255.255.255.255 is the
				recommended setting for
				REMOTE_IP_ADDRESS
set user <user_name>	message [“message”]
	password [password]
	session_timeout [seconds]
	tcp_port [tcp_port]
￿	terminal_type

Modifies user parameters.

Parameter	Description
<user_name>	Name of user, previously defined using add user. Limit of 32 characters.
message	Message presented to a dial-in user.
password	User’s password, up to 15 ASCII characters. Value is required.