3Com OfficeConnect Remote 812 add user name, add vc name, arp output outputfilename ipnameoraddr

B-10APPENDIX B: CLI COMMAND DESCRIPTION

add user [name]	{enabled [yes]}
password [password]	￿
	Adds a Telnet user to the local user table. The list users command displays these
	parameters for all users.
	Parameter	Description
	Name	Name of the user to be added, up to 32 ASCII characters.
	Password	User’s password, up to 15 ASCII characters.
	Enabled	This indicates whether the user is enabled. Enter YES or NO.
add vc [name]
	Creates a virtual channel (VC) profile. Each profile represents a connection to a
	remote site. The list vc command displays a list of all configured VCs and their
	status. Use the set vc command to modify VC parameters.

When a VC profile is created, all of the different configurable parameters associated with the profile assume default values. The default values are specified in the VC profile named 'default'. You can display the current default values with the command show vc default.

Parameter Description

name Name of the user to be added, up to 32 ASCII characters.

ARP

arp output [outputfile_name] <ip_name_or_addr> ￿

Prints the IP address (and Media Access Control Address [MAC] if on a locally connected network) of a network node to a file or the CLI (default). If a node is not in the ARP cache, an ARP request will be sent out.

ParameterDescription

<ip_name_or_addr> IP address or node name for the IP and MAC address you seek.

DELETE Delete commands remove anything you previously added.

delete access The access list defines which Remote IP Subnets are allowed to access the

<ip subnet address> Management services of the OCR812. Use this command to remove an entry in the list.

ParameterDescription

<ip subnet address> IP address in the format xx.xx.xx.xx.

delete bridge network Deletes the previously added bridge network. Make sure you have disabled the <network_name> bridge network, using the disable bridge network command, before trying to

delete it. Use list bridge forwarding to see if there is any activity over the bridge connection.

delete configuration Deletes all your configuration files, reboots the system and restores system configuration to default values.