3Com OfficeConnect Remote 812 manual Add network service servicename status

CLI Commands B-7

add network service <service_name> status

You must supply the name, internal ipx network number, node number, socket, and type of service for this service. The user must also supply gateway information to indicate the next router hop.

Parameter	Description
<name>	The name of the user for the IPX route.
Petitioned	IPX address of the route, in IPX (xxxxxxxx) form.
Hops	An integer representing how far away the route is, in “hops” through other
	routers. Values are 1-15.
name	Estimated interval in ticks it takes to deliver a packet to the remote network.
	There are approximately 18 ticks per second.
node	The internal MAC address of the server on which the service resides. This is
	typically 00:00:00:00:00:01.
socket	Indicates which “socket” the server listens on.
type	Type of service: hex number referring to file server, print server, etc. Refer to
	the table below.

Below is a partial list of the IPX services available:

Type Description

04 file server

05job server

07print server

09archive server

0A job queue

21NAS SNA gateway

2E dynamic SAP

47advertising print server

4B Btrieve VAP 5.0

4C	SQL VAP
7A	TES-NetWare VMS

98NetWare access server

9A Named Pipes server

9E PortableNetWare-UNIX

107NetWare 386

111 Test server

166NetWare management

26A NetWare management

26B Time synchronization

278NetWare Directory server

server_type [server_type]

socket [socket_number]

enabled [YES]

￿data [“string”]