3Com OfficeConnect Remote 812 manual routerid routerid, CLI Commands B-29

CLI Commands B-29

Parameter	Description
<network_name>	Designation of the IP network for which you want to set parameters.
broadcast_algorithm	Algorithm determines which address is used in broadcasts to represent
	the entire network. Choices are:
	1 - the IETF standard, nnn.nnn.nnn.255 (default)
	0 - the BSD standard, nnn.nnn.nnn.000
reassembly_	Maximum size IP datagram that the system will try to reassemble, when
maximum_size	the datagram has been fragmented to fit in the network packet size.
	The default is 3468.
rip_authentication	Text string used for RIPv2 authentication.
rip_policies_update	Allows user to enable or disable RIP policies. See text on the preceding
	page for description of keywords. A keyword with a NO_ in front is
	used to disable the policy. The default is indicated by (D).
	SEND_DEFAULT/NO_SEND_DEFAULT(D)
	SEND_ROUTES(D)/NO_SEND_ROUTES
	SEND_SUBNETS/NO_SEND_SUBNETS(D)
	ACCEPT_DEFAULT/NO_ACCEPT_
	DEFAULT(D)
	SPLIT_HORIZON(D)/NO_SPLIT_HORIZON
	POISON_REVERSE(D)/NO_POISON_
	REVERSE
	FLASH_UPDATE(D)/NO_FLASH_UPDATE
	SEND_COMPAT(D)/NO_SEND_COMPAT
	RIPV1_RECEIVE(D)/NO_RIPV1_RECEIVE
	RIPV2_RECEIVE(D)/NO_RIPV2_RECEIVE
	SILENT (default is disabled)
routing_protocol	Sets routing protocol to be used on IP network. Choices are: no routing
	protocol, RIP version 1, or RIP version 2.

set ip routing autonomous_system_number [number] table_maximum_size [number] metric_maximum_entries [number] rip_flags [METRICS, SEND_REQUEST]

￿router_id [router_id]

Sets parameters for IP routing to the specified IP router address, which is the gateway to an Autonomous System.

Parameter	Description
autonomous_system_number	Autonomous system number.
table_maximum_size	Maximum number of IP routes system can hold in its table.
	Default: 1000
metric_maximum_entries	Most next hop entries the system table can maintain.