Use the fax features

Chapter 11

Note If you press Start Color, the fax will be sent using the Fine setting.

7If the most recently sent black-and-white fax is stored in memory, the Fax Mode screen appears. Press 1 to send a new fax.

8Press Start Black.

9If you have another page to fax, when prompted, press 1. Load the next face down on the right front corner of the glass, and then press OK. If you do not have another page to fax, press 2.

Change the lighter/darker setting

You can change the contrast of a fax to be darker or lighter than the original. This feature is useful if you are faxing a document that is faded, washed out, or handwritten. You can darken the original by adjusting the contrast.

This setting returns to the default setting five minutes after the job has been completed, unless you set your changes as the default. For information, see Set new default settings.

1Load the first page face down on the right front corner of the glass.

2Press Fax.

This displays the Enter Fax Number screen.

3Enter the fax number by using the keypad.

4Press Fax again, and then press 2.

This displays the Fax Menu and then selects Lighter/Darker menu.

5Press to lighten the fax or press to darken it.

The indicator moves to the left or right as you press an arrow.

6Press Start Black.

7If the most recently sent black-and-white fax is stored in memory, the Fax Mode screen appears. Press 1 to send a new fax.

8Press Start Black.

9If you have another page to fax, when prompted, press 1. Load the next face down on the right front corner of the glass, and then press OK. If you do not have another page to fax, press 2.

Set new default settings

You can change the default value for the Resolution and Lighter/Darker setting through the control panel.

1Make your changes to Resolution and Lighter/Darker.

2If you are not already in the Fax Menu, press Fax twice. This selects the Fax Menu.

3Press 3.

This selects Set New Defaults.

4Press OK.

Set fax options

There are numerous fax options that you can set, such as controlling whether the HP all-in-one redials a busy number automatically. When you make changes to the following options, the new setting becomes the default. Review this section for information on changing fax options.

118

HP Photosmart 2600/2700 series all-in-one