Load originals and load paper

Chapter 5

Load other types of paper

The following table provides guidelines for loading certain types of paper. For best results, adjust the paper settings each time you change paper sizes or paper types. For information on changing paper settings, see the onscreen HP Image Zone Help.

Note Not all paper sizes and paper types are available with all the functions on the HP all-in-one. Some paper sizes and paper types can only be used if you are starting a print job from the Print dialog box in a software application. They are not available for copying, faxing, or printing photos from a memory card or digital camera. Papers that are only available for printing from a software application are indicated as such, below.

Paper

Tips

 

 

HP papers

● HP Premium Paper: Locate the gray arrow on the nonprinting side

 

of the paper, and then slide the paper into the input tray with the

 

arrow side facing up.

 

● HP Premium Inkjet Transparency Film: Insert the film so that the

 

white transparency strip (with arrows and the HP logo) is on top and

 

is going into the input tray first.

 

Note The HP all-in-one might not automatically detect

 

transparency film if it is loaded incorrectly, or if you use

 

transparency film other than HP transparency film. For best

 

results, set the paper type to transparency film before printing

 

or copying onto transparency film.

 

● HP Iron-On Transfers: Flatten the transfer sheet completely before

 

using it; do not load curled sheets. (To prevent curling, keep transfer

 

sheets sealed in the original package until you are ready to use

 

them.) Locate the blue stripe on the nonprinting side of the transfer

 

paper and then manually feed one sheet at a time into the input tray

 

with the blue stripe facing up.

 

● HP Matte Greeting Cards, HP Photo Greeting Cards, or

 

HP Textured Greeting Cards: Insert a small stack of HP greeting

 

card paper into the input tray with the print side down; slide the stack

 

of cards forward until it stops.

 

 

Labels

Always use letter or A4 label sheets designed for use with HP inkjet

(for printing from a

devices (such as Avery inkjet labels), and make sure that the labels are

not more than two years old. Labels on older sheets might peel off when

software application

the paper is pulled through the HP all-in-one, causing subsequent paper

only)

jams.

 

 

1 Fan the stack of labels to make sure none of the pages are sticking

 

together.

 

2 Place a stack of label sheets on top of full-size plain paper in the

 

input tray, label side down. Do not insert labels one sheet at a time.

 

 

Continuous banner

Continuous banner paper is also known as computer or z-fold paper.

paper

1 Remove the output tray.

 

 

 

42

HP Photosmart 2600/2700 series all-in-one