1Make sure you have paper loaded in the input tray.

2Load the first page of your original face down on the right front corner of the glass.

3Press Copy, if not already lit.

4Press Start Copy Black.

5Remove the first page from the glass and load the second page.

6Press Start Copy Black.

Make a 10by 15cm (4by 6inch) borderless copy of a photo

For the best quality when copying a photo, load photo paper in the input tray and change your copy settings for the correct paper type and photo enhancement. You might also want to use the photo print cartridge for superior print quality. With the tricolor and photo print cartridges installed, you have a six-ink system. For more information, see Use a photo print cartridge.

1Load 10 by 15 cm (4 by 6 inch) photo paper in the input tray.

2Load your original photo face down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass.

3Press Start Copy Color.

The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your original photo, as shown below.

Tip If the output is not borderless, then set the paper size to 10x15 cm Borderless or 4x6 Borderless, set the paper type to Photo Paper, set the Photo enhancement, and then try again.

For more information on setting the paper size, see Set the copy paper size. For information on setting the paper type, see Set the copy paper type.

For information on setting the Photo enhancement, see Enhance light areas of your copy.

Copy a 10by 15cm (4by 6inch) photo onto a full-size page

You can use the Fill Entire Page setting to automatically enlarge or reduce your original to fill the printable area of the paper size loaded in the input tray. In this example, Fill Entire Page is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to create a full-size borderless copy. When copying a photo, you might want to use the photo print cartridge for superior print quality. With the tri-color and photo print

features copy the Use

User Guide

63