Get HP support

Chapter 17

HP Quick Exchange Service (Japan)

HP Quick Exchange Service

0570-000511

 

 

:03-3335-9800

 

 

 

:

 

9:00

5:00

10:00

 

5:00

 

1

1

3

 

:

Prepare your HP all-in-one for shipment

If after contacting HP Customer Support or returning to the point of purchase, you are requested to send your HP all-in-one in for service, remove the print cartridges and pack the HP all-in-one in the original packing materials to avoid further damage. You can remove print cartridges from your HP all-in-one whether it is turning on or not. Retain the power cord and control panel overlay in case the HP all-in-one needs to be replaced.

This section provides instructions on how to remove print cartridges from a functional HP all-in- one, remove print cartridges from a non-functional HP all-in-one, and remove the control panel overlay and pack your HP all-in-one.

Note This information does not apply to customers in Japan. For information on service options in Japan, see HP Quick Exchange Service (Japan).

Remove print cartridges from a functional HP all-in-one

1Turn on the HP all-in-one.

See Remove print cartridges from a nonfunctional HP all-in-oneif your device will not turn on.

2Open the print-carriage access door.

3Wait until the print carriage is idle and silent, and then remove the print cartridges from their slots and lower the latches. For information on removing the print cartridges, see Replace the print cartridges.

Warning Remove both print cartridges and lower both latches. Failure to do so might damage your HP all-in-one.

4Place the print cartridges in print cartridge protectors or an airtight plastic container so they will not dry out, and put them aside. Do not send them with the HP all-in-one unless the HP customer support call agent instructs you to.

208

HP Photosmart 2600/2700 series all-in-one