Chapter 16

1 Copper-colored contacts

2 Plastic tape with pink pull tab (must be removed before installing)

3 Ink nozzles under tape

Troubleshooting information

Reinsert the print cartridges and verify that they are fully inserted and locked in place.

Cause

The contacts on the print cartridge are not touching the contacts in the print carriage.

Solution

Remove and then reinsert the print cartridges. Verify that they are fully inserted and locked in place.

Cause

The print cartridge or sensor is defective.

Solution

Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

The HP all-in-one does not print

Solution

If your HP all-in-one and computer are not communicating with each other, try the following:

Check the USB cable. If you are using an older cable, it might not be working properly. Try connecting it to another product to see if the USB cable works. If

174

HP Photosmart 2600/2700 series all-in-one