|
| FEATURES |
|
|
|
| |
|
|
|
|
|
|
|
|
PRODUCT SPECIFICATIONS |
|
| |
Input | 120 V, 60 Hz, AC only, 8.5 Amps | ||
Weight | 28.5 lbs. | ||
KNOW YOUR cultivator
See Figure 2, page iii.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
switch LOCK-OUT
The switch
switch trigger
The switch trigger starts and stops the rotation of the tines.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
Wheel Hitch Pins (2)
Front Handle
Handlebar Bolts (2)
Knobs (2)
Operator’s Manual
WARNING:
This new product has been shipped in a partially as- sembled condition as described below. Carefully check the packing list below to ensure all items are included in the package; the packing list describes all loose items that are not assembled to the product as shipped. Do not operate the product if any packing list items are already assembled to your product when you unpack it. Call the customer service number below for assistance. Operation of a product that may have been improperly preassembled could result in serious personal injury.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
WARNING:
If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warn- ing could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is com- plete. Failure to comply could result in accidental starting and possible serious personal injury.
Cultivator Drag stake Adjustment Knob Hitch Pins (2) Felt Washers (2) Inner Tines (2) Outer Tines (2) Wheels (2)
Wheel Washers (2)
Assembling the handleBAR
See Figure 3, page iii.
nLoosen the two handlebar knobs.
nUnfold the handlebar into operating position.
NOTE: Do not use force. If there is binding, continue to loosen the knobs. Do not allow the switch cable to become pinched when raising the handlebar.
nRetighten the handlebar knobs.
