HP 2613, 2710xi, 2610xi, 2610v manual Case a Separate fax line no voice calls received

(continued)
Other equipment/services	Recommended fax setup for	Recommended fax setup
sharing your fax line	parallel-type phone systems	for serial-type phone
		systems

(You answered Yes to questions 4, 5, and 7 only.)

Case A: Separate fax line (no voice calls received)

If you have a separate phone line on which you receive no voice calls, and you have no other equipment connected on this phone line, set up your HP all-in-one as described in this section.

Fax setup

Back view of the HP all-in-one

1 Telephone wall jack

2 Phone cord supplied in the box with your HP all-in-one connected to the "1-LINE" port

To set up your HP all-in-one with a separate fax line

1Using the phone cord supplied in the box with your HP all-in-one, connect one end to your telephone wall jack, then connect the other end to the port labeled "1-LINE" on the back of your HP all-in-one.

Caution If you do not use the supplied cord to connect from the telephone wall jack to your HP all-in-one, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. If the supplied phone cord is too short, see The phone cord that came with my HP all-in-one is not long enough for information on extending it.

2Set up the HP all-in-one to answer incoming calls automatically: a Press Setup, press 4, and then press 3.

This displays the Basic Fax Setup menu and then selects Auto Answer.

bPress 1 to select On.

cPress OK to accept the setting.

3(Optional) Change the Rings to Answer setting to one ring or two rings. For information on changing this setting, see Set the number of rings before answering.

4Run a fax test. For information, see Test your fax setup.

User Guide 83