3Com OfficeConnect Remote 812 manual add ipx route ipxnetaddress, add ipx service servicename

add ipx route <ipx_net_address>

CLI Commands B-5

address	Address of the IPX network.
interface	Name of the interface with which this IPX network is to be associated. The
	default is the first LAN interface (eth:1).
enabled	Optional parameter indicates whether the network is enabled (YES) or
	disabled (NO) by this command. YES is the default.
frame	Frame encapsulation chosen for this IPX network.

gateway [ipx_host_address]

metric [metric_number]

￿ticks [tick_number]

Adds an IPX static route (for the LAN) to the system’s IPX Route table, which defines static routes to remote IPX networks.

The command list ipx routes displays currently defined static routes.

Parameter	Description
<ipx_net_address>	IPX network address requiring a route.
gateway	IPX address of the host which will act as a gateway. The format is
	nnnn.xx:xx:xx:xx:xx:xx (net_addr.mac_address).
metric	Number of “hops” through different routers needed to reach the remote
	IPX network.
ticks	Estimated interval in ticks it takes to deliver a packet to the remote
	network. There are approximately 18 ticks per second.

add ipx service [service_name]

address [internal network number] gateway [network_number.mac_address] metric [metric]

node [internal_node_number] socket [socket_number]

￿type [service_type]

Adds a static IPX service (for the LAN) to the IPX services table. You must supply the name, internal ipx network number, node number, socket, and type of service for this service. The user must also supply gateway information to indicate the next router hop. To remove this service, use the delete ipx service command.

Parameter	Description
service name	Designation of IPX service.
address	Internal network number for the IPX service on which this service resides.
Gateway	Address of the router you defined as the gateway.
metric	An integer representing how far away the default router is, in “hops” through
	other routers. Values: 1-15.
node	The internal MAC address of the server on which the service resides. This is
	typically 00:00:00:00:00:01.
type	Type of service: hex number referring to file server, print server, etc. Refer to
	the table below.
socket	Socket number that the service uses.