3Com OfficeConnect Remote 812 manual show ip settings, Advanced Bridging Options

To change the Spanning Tree Priority, use the command: set bridge spanning_tree_priority <priority value>

enable bridge spanning_tree

disable bridge spanning_tree

To disable or enable Spanning Tree, use the commands:

To change the Aging Time, use the command:

show bridge settings

The advanced bridging configuration options include Aging Time, Forward Delay, Spanning Tree, and Spanning Tree Priority.

To see the current settings for these options, use the command:

Bridging 6-37

IP Forwarding refers to the routing of IP packets from one interface to another. It does not affect communicating to the OCR 812 itself. Even when IP Forwarding is disabled, you can perform non-routing functions such as use a Web browser to manage the unit and use PING.

To see the current IP Forwarding status use the command:

￿show ip settings

To disable IP Forwarding use the command: disable ip forwarding

Advanced Bridging

Options

￿Except for enabling Spanning Tree, most users do not need to change the advanced parameters from their default settings

The Aging Time is the time (in seconds) for aging out forwarding table information.

set bridge aging_time <seconds>

The Forward Delay is the time (in seconds) to wait while learning forwarding information before starting to bridge packets.

To change the Forwarding Delay, use the command:

￿	set bridge forward_delay <seconds>
Spanning￿		Tree refers to the Spanning Tree Protocol which is used to eliminate

network loops between bridges.

￿The Spanning Tree Priority is the priority assigned to a bridge that is running the Spanning Tree Protocol. It is used for prioritizing the bridges when Spanning Tree is enabled.

￿