3Com OfficeConnect Remote 812 manual Quick Setup Script Instructions, Password Protection

4-2CHAPTER 4: QUICK SETUP

Quick Setup Script Instructions

Quick Setup Script

Downgrading the Remote 812 Software to a Previous Version

Downgrading the 812 software to an older version is not recommended (we suggest you upgrade to obtain the latest and most reliable software available).

If you do choose to downgrade, we suggest you delete your existing configuration before or after you install the downgrade (in any case, you must delete the existing configuration).

Installation of a downgraded version of the Remote 812 software (a version older than the version currently installed) is likely to cause a reduction in functionality. The reduction in functionality you experience may be substantial or minor, depending on which version you have before the downgrade, and which version you downgrade to.

The following sections contain the CLI Quick Setup script. You will be required to enter information concerning your network configuration. Questions in the script are presented here in tables. Write the appropriate information for your desired configuration in the tables appearing throughout this section.

Quick Setup (CLI) is designed only for initial set up of the OCR 812. When setup is complete, this one-time program will alter your configuration files (which the program cannot edit). If you make an error and need to restart, use the delete configuration command to reboot and return to factory default settings.

The OCR 812 Quick Setup will let you set up LAN-side and global configuration for your system.To configure wide-area profiles you should run the OCR 812 VC Wizard using the QUICKVC command.

Do you want to continue Quick Setup?

The OCR 812 Quick Setup allows you to set up a simple configuration for IP, IPX, and bridging.

Please answer the questions presented below with "yes" or "no" to indicate which portions of the system you want to configure.

When Quick Setup displays a question it will display a default answer in square brackets, like "[yes]". If you simply press enter, this is the answer that will be used for you.

Password Protection

Question	Default	Your System
Do you want the CLI to be password	[no]
protected?
What is the console login password (no	[ ]
more than 8 characters)?

Which portions of the network do you want to configure?

Question	Default	Your System
Network management ?	[yes]
IP ?	[yes]