Overview
This section provides a description for all commands available for the Eicon 1530.
Accessing the CLI
To access the command line interface, use a telnet program (such as Telnet included with Windows, or HyperTerminal) to telnet using the LAN IP address of your Eicon 1530. By default this address is 192.168.1.1. For example, from within Windows, click ‘Start’, ‘Run’, type in the following, then click ‘OK’.
telnet 192.168.1.1
A Telnet window should appear asking you for a password.
Notational Conventions
The section uses the following conventions:
Syntax Example | Description |
RESET | UPPERCASE TYPE indicates keywords. The actual words |
| can be entered in either uppercase or lowercase. |
|
|
[ /C n ] | Items enclosed in square brackets are optional. You can |
| either include them or not. Do not enter the brackets. If the |
| items are separated by vertical bars, you must choose one of |
| the items. Enter only one item. Do not enter the vertical bar. |
|
|
numHops | Items in lowercase type are |
| these items with values appropriate to your system. |
|
|
{ THIS THAT } | Two or more items enclosed in braces and separated by a |
| vertical bars means you must choose one item. Enter only |
| one item. Do not enter the vertical bar. |
|
|
Command Line Interface | 107 |
