SET X25 ACKTIMER AckTimer
Defines the Acknowledge timer, which is how long, in milliseconds, the line can remain idle before an RR (Receiver Ready) is sent to the remote. This lets the remote know that the connection is still active. The remote will respond with an RR.
Range:
Default: 20.
SET X25 IDLETIMER seconds
Defines the amount of time a
Range:
Default: 30 seconds.
SET X25 MAXIDLETIME seconds
Defines the maximum amount of time an X.25 connection can be idle before the connection is dropped.
Range:
Default: 20 seconds.
SET X25 MAXRETRY number
Defines the maximum number of attempts this profile makes to establish a connection with this profile. When this limit is reached, the profile is the \"failed\" state. To reset the profile manually, dial it or reset the Eicon 1530.
Range:
Default: 10.
SET X25 RETRYDELAY interval
Defines the amount of time to wait after a failed connection attempt, before retrying.
Range:
SET X25 MINCONTIME seconds
Defines the minimum amount of time an X.25 connection must stay connected.
Range:
Default: 30 seconds.
SET X25 N3 MaxRetryCount
Defines how many times an X.25 packet that is not successfully being received by the remote will be retransmitted.
Range:
Default: 3.
Command Line Interface | 154 |
