Step 4: Modify VHSI Settings
Once you have logged into the Eicon 1530 web interface, the first setting you should verify is the choice of protocol for the VHSI port (set to ‘X.25’ by default). The protocol should be selected first because all profile settings (which define particular connections) are deleted when the protocol is changed.
About the Web Interface
The Eicon 1530 settings are changed via web pages that reside on the Eicon 1530 itself.
•When making changes using the web interface, make sure to click the ‘Save’ button on each page. The ‘Save’ button is located at the bottom right of each web page. If you move to another page without saving, your changes will not be saved to the device.
‘Save’ button
Once saved, the new settings will not take effect until you reset the device. It is not necessary to do a reset until you have completed all the steps in this quickstart.
•The ‘Reset Form’ button, located at the bottom left of each page, reverts all settings in the current page back to the original values when the page was opened.
‘Reset
form’ button
• Clicking a setting name displays
•Once you have finished making changes to all settings, you must click the ‘Reset’ button, located at the top of the browser window, for the settings to take effect.
Setup | 17 |
