Eicon Networks 1530 manual System Menu

System Menu

System Name

Sets the domain name of the Eicon 1530. This is also the address of the home page of the web-based configuration interface. The text ‘.wanrouter’ is appended to the name you enter.

Range: 1-64 characters, no spaces. Default: eicon1530 (‘eicon1530.wanrouter’).

Login Password

Defines the password that users need to specify when logging on. The password is case-sensitive, which means ‘PASS’ and ‘pass’ are not the same.

Range: 0-11 characters, no spaces. Default: none (no password required to log in).

Repeat Login Password

For verification, repeat the password you entered in the ‘Login Password’ field. The password will only be changed if both fields match.

Enable Remote Management

When enabled, allows remote computers to connect to the Eicon 1530 and access its configuration interfaces. A remote computer is considered to be any computer that is not on the local LAN. It is strongly recommended that you define a system password if you enable this option.

Set Time

Sets the internal system clock.

Set Date

Sets the internal system date, in yyyy-mm-dd format.

Get Time and Date button

Gets the time and date from your computer’s clock.

Log Output

Remote IP Address

Sends event log information to the specified device. Choices:

•Disabled: Stops display of event log output, but does not stop recording of event log data.

•Send to Remote: The remote devices must implement a UNIX-compatible syslogd protocol to successfully receive event log messages. When this setting is selected, you must also enter the IP address of the remote device.

Web Interface Settings Glossary 62