DNS DOMAIN Commands
SET DNS DOMAIN domain[,domain[,...]]
When DNS relay is enabled, each DNS request is checked against this parameter. If they match, a connection defined by this profile is established, and the request is forwarded.
Range:
SET DNS ADDRESS { PRIMARY SECONDARY } dnsaddr
Defines the address of the DNS server where DNS requests are to be sent, when DNS Relay is enabled.
PRIMARY: First DNS server where requests are to be sent.
SECONDARY: Second DNS server (used when the PRIMARY does not reply).
dnsaddr: IP address of the server.
ENABLE DNS RELAY
DISABLE DNS RELAY
When enabled, all DNS requests are forwarded to a remote DNS server. This is done by matching the requested domain against the domain name assigned to each profile. If a match is found, the profile is connected and the DNS request is forwarded. Default: Enabled.
SHOW DNS CONFIGURATION
Displays all DNS configuration settings.
Command Line Interface | 124 |
