Step 1: Connect the Cables
Leave your computer on when connecting the cables.
|
|
|
|
|
|
| Front of device |
|
|
|
|
|
|
|
|
| Back of device | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VHSI Port | Ethernet Port | Ethernet | Power | Power |
VHSI |
| Lights | Light |
|
Light |
|
|
|
|
VHSI | Blue | Ethernet Hub |
| Power |
cable | Ethernet |
|
| adapter |
| cable |
|
|
|
| (straight- |
|
|
|
| through) |
|
|
|
To modem or |
|
|
|
|
leased line |
|
|
|
|
1.Connect the power adapter. The Power indicator light should turn green.
Note: For more information on indicator lights, see Ports and Indicator Lights on page 29.
2.Connect your VHSI Cable.
Connect the appropriate end of the cable to the VHSI port of the Eicon 1530, and connect the other end to your modem or leased line connector.
Note: VHSI cables are not included with your Eicon 1530. Cables can be ordered from Eicon Networks, or you can build your own (see the User’s Guide).
3.Connect the Ethernet cable.
LAN | Plug one end of the included blue Ethernet cable into your network hub, then |
| plug the other end into the Eicon 1530’s Ethernet port. |
|
|
Single | Note: To connect the Eicon 1530 to a single computer, a crossover cable (sold |
Computer | separately) is required. |
| Plug one end of your crossover cable into the Ethernet port on your computer, |
| then plug the other end into the Eicon 1530’s Ethernet port. |
|
|
The green light at the top left corner of the Ethernet port should turn on when the cable is connected properly.
What’s Next?
See Step 2: Verify Computer TCP/IP Settings on page 14.
Setup | 13 |
