Eicon Networks 1530 manual Displays the setting of all Dhcp related parameters

SET DHCP DOMAIN domain

Defines the domain name returned in response to a DHCP request, when the DHCP server is enabled.

Range: 0-31 characters, no spaces.

SHOW DHCP CONFIGURATION

Displays the setting of all DHCP related parameters.

SET DHCP SERVERADDR { PRIMARY SECONDARY } DHCPaddr

Defines the address of the DHCP servers where DHCP requests are to be forwarded, when DHCP relay is enabled.

Primary: The IP address that follows is for the primary DHCP server.

Secondary: The IP address that follows is for the secondary DHCP server.

DHCPaddr: IP address of the DHCP server.

SET DHCP MAXHOPS numHops

When a DHCP request is received with a hop count greater than the number specified, the request is discarded. Only valid when DHCP is set to relay.

numHops: Maximum hop count supported for DHCP relay requests.

Range: 1-16.

Default: 4.

SET DHCP DELAY seconds

Defines how long to wait before relaying a DHCP request. Since DHCP requests and responses are broadcast to all stations on a LAN, the Eicon 1530 must check that no other DHCP server has responded to a DHCP request before the request is forwarded to the external network.

seconds: Number of seconds to wait before forwarding a DHCP request.

Range: 1-30 seconds.

Default: 4 seconds.

SHOW DHCP TRACE [memsize [framesize]]

Starts a DHCP trace, or displays an active DHCP trace.

memsize: RAM reserved to store the trace on the Eicon 1530.

Range: 1-63 KB. Default: 16 KB.

framesize: The number of characters to display in each frame.

STOP DHCP TRACE

Stops an active DHCP trace.

Command Line Interface 116