Eicon Networks 1530 manual See Create a Profile on

Choosing a VHSI Protocol

1.From the Link List (the menu at the left of the screen), click on the small ‘+’ next to ‘VHSI Port’ to expand the VHSI Port group, then click the ‘Protocol’ link.

‘Protocol’ link

2.From the ‘Protocol’ drop-down menu, select a protocol.

‘Protocol’ drop-down menu

3.Click the ‘Save’ button, located at the bottom right of the web page, when finished.

Note: If you do not click ‘Save’, the changes will be lost when you move to another page.

Modifying Other VHSI Settings

After choosing a protocol, make changes to your VHSI settings, if required. The settings presented will depend on the protocol chosen.

Note: You can bring up context-sensitive help for each setting by clicking on the setting name. Also, when making changes, ensure that the new settings are consistent with those of your network provider.

•If the protocol is set to X.25 or Frame Relay:

–Verify all settings as presented on the Protocol page (this should be the current page) and click ‘Save’.

–If required to make changes to HDLC or Static DLCI settings, click the ‘HDLC’ (for X.25) or ‘Static DLCI’ (for Frame Relay) link (located at the top of the Protocol page), make any required changes, then click ‘Save’.

•If the VHSI port is connected to a dial-up line, click ‘Dialer’ in the Link List. Make any required changes, then click ‘Save’.

•Click ‘VHSI Port’ in the Link List. Make any required changes, then click ‘Save’.

What’s Next?

See Step 5: Create a Profile on page 19.

Setup 18