Protocol Menu (VHSI Tree) > Dynamic DLCI Group (when protocol is set to Frame Relay)
These parameters are only available when the protocol is set to Frame Relay.
Enable Dynamic DLCI
Defines the DLCI mode.
Enabled: Enables dynamic configuration of new DLCIs for this connection. Dynamic DLCI (also referred to as "DLCI discovery") eliminates the need for static configuration of new DLCIs. All previously configured DLCIs for this connection are removed. Dynamic DLCI is performed automatically by the Frame Relay Bearer Service, so you do not have to configure a separate DLCI for each Permanent Virtual Circuit in your Frame Relay network.
Disabled: Enables static configuration of new DLCIs for this connection. In this mode, each DLCI must be defined manually.
Global window size
Defines the Frame Relay window size for all discovered DLCIs on a given Frame Relay connection, which determines the number of packets that can be sent before waiting for an acknowledgment. Only applicable if Dynamic DLCI is enabled. Used for transmission buffer control.
Range:
Default: 2.
Web Interface Settings Glossary | 96 |
