Connection Menu > Authentication Group (when protocol is set to PPP)
These parameters are only available when the protocol is set to PPP.
Local Username
Defines the name used when replying to valid authentication requests.
Range:
Local Password
Defines the password used when replying to valid authentication requests.
Range:
Always Use Encrypted Password
Defines how authentication is handled for a call. If the remote is not using the same type of password (encrypted/unencrypted), the call is rejected.
•ENCRYPTED: Accept calls using encrypted passwords only.
•ANY: Accept calls using either encrypted or unencrypted passwords.
Default: ANY (encrypted and unencrypted are accepted).
Always Authenticate Remote
Enables/disables password authentication when dialing out.
•If enabled, the Eicon 1530 attempts to authenticate the remote with whatever authentication method is defined.
Default: Disabled.
Remote Username
Defines the name the remote device must supply when authentication is requested by the Eicon 1530.
Range:
Remote password
Defines the password the remote device must supply when authentication is requested by the Eicon 1530.
Range:
Web Interface Settings Glossary | 70 |
