SET X25 RESTOREDELAY interval
Defines how long to wait before automatically restoring a profile from “failed” state to “ready”.
Range:
Default: 300 seconds.
A profile fails if a connection cannot be established after the Max Retries limit is reached.
SET X25 T20 T20Timer
The Packet Level Restart timer is started when a Restart Request packet is sent. It is stopped when a Restart Confirm or Restart Request packet is received. On expiration, the Packet Level interface is closed.
Range:
Default: 60 milliseconds.
SET X25 T21 T21Timer
This Call Supervision timer is started when a Call Request packet is sent. It is stopped when a Call Accepted or Call Cleared packet is received. On expiration, a Clear Request packet is sent.
Range: 0-999 seconds.
Default: 60.
SET X25 T22 T22Timer
This Reset Supervision timer is started when a Reset Request packet is sent. It is stopped when a Reset Confirmed or Reset Request packet is received. On expiration, the Reset Request packet is retransmitted.
Range:
Default: 60 seconds.
SET X25 T23 T23Timer
This Clear Supervision timer is started when a Clear Request packet is sent. It is stopped when a Clear Indication or Clear Confirmation is received. On expiration, the Clear Request packet is retransmitted.
Range: 0 to 999 seconds.
Default: 60 seconds.
SHOW X25 STATISTICS
Displays X.25 statistics.
SHOW X25 STATUS
Displays X.25 status.
Command Line Interface | 155 |
