6.Make the required changes to the profile. Be sure to scroll down and inspect all parameters. In particular:
•If you are using X.25, make sure to enter the remote DTE address and remote IP address.
•If you are using Frame Relay, make sure the local DLCI number is the same as the remote DLCI.
•If you are using PPP, make sure to enter the IP information at the bottom of the page.
7.Click the ‘Save’ button when finished making your changes. If you do not click ‘Save’, your changes will be ignored. However, the profile you added will remain with the default settings.
8.To create another profile, enter the new name in the ‘Name’ field under ‘New Profile’ at the bottom of the page, then click ‘Done’.
When you have more than one profile, selecting the associated radio button allows you to select which profile to edit.
1. Select
Profile
2. Click ‘Edit”.
To delete a profile, select the profile and click ‘Delete’.
1. Select profile
2. Click ‘Delete’.
To delete all profiles, click the ‘Delete All’ button.
9.For your settings to take effect, click the ‘Reset’ button at the top of the window.
Using your Eicon 1530 | 40 |
