Remote Management
By default, the Eicon 1530 allows remote devices to access its configuration interfaces via the external network. This feature can be disabled; however, this does not affect traffic on the local LAN created by the Eicon 1530. If the local LAN is connected to other networks, these computers will continue to have access to the Eicon 1530, even if remote management is disabled. Consider the following topology:
In the above example, all computers on the two LANs have access to the Eicon 1530 configuration interfaces. However, remote computer A is blocked as it must go through the external network to access the Eicon 1530.
Note: Remote security is implemented using IP filtering. In the web interface, expand the ‘IP’ section and click ‘Filters’.
Disabling Remote Management
To disable remote management:
Security | 49 |
